Here are common problems and their respective solutions when using a Recording Lite room, which comes with the Arturia Minifuse interface:
Interface not powered on or not recognised by laptop
Problem: The interface shows no lights and isn't recognised by the laptop.
Fix:
There are 2 USB cables at the back of the interface: USB C to C and USB A to C. You should use either to connect, depending on the USB port on your laptop.
Follow the USB cable from the laptop and confirm it is plugged into the USB-C port with the laptop icon.
Do not use the USB-A port labeled “HUB” — if the cable is plugged in there, move it to the USB-C laptop port instead. The hub port is for the midi keyboard.
Mic Not Functioning Properly
Problem: The mic isn't working or picking up sound.
Fix:
- Check if the mic is connected to the front of the interface.
- Engage the 48V button on the interface's front to power the mic.
- Turn up the gain dial on Input 1 of the interface.
- Ensure the DAW has a mic track set up with Arturia Input 1 selected.
- Check all 3 switches on the mic are set to central positions (db level on 0db).
- Use only the front side of the mic.
Test the mic using the 'direct monitor' button; if it works, it's likely a DAW setup issue; if not, it might be a cable/setup problem.
*Please note, if you have Direct Monitor pressed and direct monitoring enabled in your DAW at the same time, it will produce feedback. Unpress the button and continue to use it within your DAW*
Speaker Issues
Problem: Speakers are not functioning.
Fix:
- Check if the yellow speaker cables are connected to the speaker outputs on the back of the interface.
- Verify that the speakers have power (lights on the front).
- Turn up the monitor dial.
- Confirm the laptop's sound output source is set to the 'Arturia' device - both on your Mac/PC sound settings and on your DAW Audio preferences.
Headphones Not Working
Problem: Headphones aren't producing sound.
Fix:
- Check that the headphones are connected to the headphone port on the front of the Arturia interface.
- Ensure the headphone volume dial on the interface is turned up.