Troubleshooting the Minifuse 4

Volume Knob Not Responding or No Sound

-Ensure the speaker cables are connected to outputs 1L & 2R
-Select the Minifuse as the Output in your DAW Settings:

*Ableton: Select CoreAudio (MacOS) or ASIO (Window) in the Driver Type menus>Select Minifuse 4 in the Audio Input and Output Device 
*FL Studio: Click the Options Menu>Audio Settings>Device dropdown select the MInifuse 4

Headphone 2 not working

1. Download Minifuse Control Center https://www.arturia.com/support/downloads-manuals
2. Open MiniFuse Control Center, Select the 'Outputs' Tab at the top
3. Select OUTPUTS 3&4 and on the right side of the mixer: Analog 1, Analog 2, USB 3-4
4. Select the plus icon (+) to the right of USB 3-4 Level Mixer and a new window "Add Channels to Mixer" will open
5. Select [1-2] in the COMPUTER SOURCES to add USB 1-2 (it will turn blue) and click outside "ADD CHANNELS TO MIXER' to close it
6. Unmute the newly added USB 1-2 Level Mixer and you should now have audio coming out of both headphones

Clicks and Pops
If you experience clicks and pops in your projects, try increasing the buffer size in your host application or the audio driver.
 

Latency Issues
-Latency is a direct byproduct of sample rate and buffer size settings, so adjusting these settings in your host application or the audio driver will have an impact on latency. For more information on how to change these settings in your DAW, please see this support articule from Minifuse: HERE
-If the Direct Monitoring button is pressed on the Interface, you'll need to turn off monitoring for the recording channel in your DAW to prevent an echo through the speakers or headphones. 

How to Perform a Factory Reset 

1. Turn off the Minifuse
2. Press and hold "Instrument 2" and "48V"
3. While holding the above buttons, press "A" to power the Minifuse 4 back on
4. Once powered on, release all buttons
5. The Minifuse Control Center will detect the interface is in a special update mode and prompt you select "Upgrade"
6. Follow the on-screen instructions and wait for the update process to complete 
   
   If any issues persists, try uninstalling and reinstalling the Minifuse Control Center 

Here's a VIDEO on how to setup the Minifuse 4