DJ: Denon set-up features and tutorials

These guides will help with everything you need to know about our new Denon set-up in Dalston Studio 5.

• Read this guide for information about the Denon SC6000.
• Read this guide for information about the Denon X1850.
• Download the Engine DJ software.

Hard reset:
Power Button: Press and hold this button for 10 seconds to reset SC6000 PRIME to factory settings.

Linking DENON SC6000:

Your decks should be connected already, but in case they're not, follow this diagram:

Getting Started (Laptop)

• Connect your computer to USB 1 or USB 2 port at the top panel of the Denon DJ X1850
• Set the USB1/USB2 selectors at the top panel for all mixer channels, according to the USB 1/2 port you connected the Denon DJ X1850 with your computer.
• Set the INPUT SELECT selectors at the top panel for Channels 1 to 4 to USB position

Getting Started (Laptop)

• As shown below, the USB port is at thefront of the deck
• Front USB Port: Connect a standard USB drive to this USB port. When you select that USB drive as a source (press the Source button), you can use the display to select and load tracks from your USB drive. There are also two similar USB ports on the rear panel. You can use the included USB extension cable to accommodate larger or smaller USB thumb drives. 
• SD Card Slot: Insert a standard SD card to this slot. When you select that SD card as a source (press the Source button), you can use the display to select and load tracks from your SD card.